i'm tiring to model a pv array in simulink where one or more modules is partially shaded, for this i have to enter irradiation data per hour for all blocks and the reduced irradiation value for the shaded module. for eg.
i have array of 5 modules, of this 1 is shaded by some factor, then i have to enter the irradiation value for first hour then calculate irradiance for 0%, 10%,20%....100% shaded module and then plot it on xy graph for each. hence i should have a total of (number of hours * fraction of irradiance) graphs.
eg. if have irradiance data from morning 6 o'clock to evening 7 o'clock i should have 14*11=154 graphs.![]()
i have array of 5 modules, of this 1 is shaded by some factor, then i have to enter the irradiation value for first hour then calculate irradiance for 0%, 10%,20%....100% shaded module and then plot it on xy graph for each. hence i should have a total of (number of hours * fraction of irradiance) graphs.
eg. if have irradiance data from morning 6 o'clock to evening 7 o'clock i should have 14*11=154 graphs.