Hi,
I am doing the same thing. It would be great if you can share the adaptor. I have been trying to build my own adaptor, but this is my first time handling hardware with Matlab, so not much luck. Thank you very much for the help.
Jeff
"Ivan " <lemaire.ivan@gmail.com> wrote in message <km3qli$2o7$1@newscl01ah.mathworks.com>...
> "Sascha D" wrote in message <inho57$5mo$1@fred.mathworks.com>...
> > Hi,
> > I want to use an uEye USB camera with the Image Acquisition Toolbox in Matlab 2008b. Since i have no suitable adaptor for my needs i decided to write my own with the adaptorkit and the uEye SDK.
> > I try to initialize the camera inside the getAvailHW() function.
> > I can retrieve information from the cameras EEPROM with some functions from the SDK. But when i try to call is_InitCamera() to initialize the cam, i retrieve an error that the device cannot be opened. A flag indicates the camera is in use, so it seems it is somehow blocked by the Adaptorkit/Matlab, since the exact same code i use for the camera works when i use it eg. in a console-application.
> > When i change the ID from the camera with provided tools from the vendor, the init the cam works but matlab crashes with a segmentation fault.
> > Any help on this topic is highly appreciated,
> > thx Sascha
>
> Hi Sascha,
>
> I'm also trying to use an uEye USB camera with Matlab. It would be very helpfull if you sended me your way to adapt these two..
>
> Kind regards and thanks in advance,
>
> Ivan![]()
I am doing the same thing. It would be great if you can share the adaptor. I have been trying to build my own adaptor, but this is my first time handling hardware with Matlab, so not much luck. Thank you very much for the help.
Jeff
"Ivan " <lemaire.ivan@gmail.com> wrote in message <km3qli$2o7$1@newscl01ah.mathworks.com>...
> "Sascha D" wrote in message <inho57$5mo$1@fred.mathworks.com>...
> > Hi,
> > I want to use an uEye USB camera with the Image Acquisition Toolbox in Matlab 2008b. Since i have no suitable adaptor for my needs i decided to write my own with the adaptorkit and the uEye SDK.
> > I try to initialize the camera inside the getAvailHW() function.
> > I can retrieve information from the cameras EEPROM with some functions from the SDK. But when i try to call is_InitCamera() to initialize the cam, i retrieve an error that the device cannot be opened. A flag indicates the camera is in use, so it seems it is somehow blocked by the Adaptorkit/Matlab, since the exact same code i use for the camera works when i use it eg. in a console-application.
> > When i change the ID from the camera with provided tools from the vendor, the init the cam works but matlab crashes with a segmentation fault.
> > Any help on this topic is highly appreciated,
> > thx Sascha
>
> Hi Sascha,
>
> I'm also trying to use an uEye USB camera with Matlab. It would be very helpfull if you sended me your way to adapt these two..
>
> Kind regards and thanks in advance,
>
> Ivan